Parkside PPS 40 A1 :

  • Modèl PPS 40 A1
  • IAN : 307722
  • manufacturer : C.M.C. GmbH
  • Intended use : The device is intended for compressed-air plasma cutting of all electrically conductive metals.
  • The device must not be used: in insufficiently ventilated rooms,
    • In moist or wet environments,
    • in explosive environments,
    • to defrost pipes,
    • in close proximity to people with cardiac pacemakers and„ in close proximity to easily flammable materials

    Safety instructions (please read the instructions for use)

  • If the device is not in operation, always switch it off by pressing the ON/OFF switch. Place the electrode holder on an insulated surface and only remove it from the holder after allowing it to cool down for 15 minutes.
  • Remove all flammable materials within 10 m of the plasma cutter
  • Protect yourself and others from flying sparks and hot metal.
  • Do not use the plasma cutter to defrost frozen tubes.
  • Inhalation of welding fumes can endanger health you need to Use a extractors to remove the fumes.
  • Wear protective clothing prior to welding work
  • Wear gloves
  • Open windows to guarantee air supply
  • Wear safety goggles
  • Maintenance and care (please read the instructions for use)

  • the electrode, diffuser and the nozzle can be replaced once the nozzle clamping sleeve has been unscrewed.
  • if there is a crater of approximately 1.5 mm depth in the centre, The electrode must be replaced.
  • The nozzle must be placed if the central bore is damaged.or if it has expanded in comparison to a drilling of a new nozzle.
  • Warranty and service information

  • Warranty : 3 years from the date of purchase
  • Phone: :0-808-189-0652
  • E-mail :
  • useful links

  • PDF operating instructions
  • features, accessories and video